HP StorageWorks 2.64 Director Switch - Manual (Page 85)

Director Element Manager user guide 85
• G Port Module—For the fiber channel port card, the following acronyms may display to
indicate the card’s port technology:
• GLSL—G_Port, long wave, single mode LC connector, 1 Gigabit
• GSML—G_Port, short wave, multimode, LC connector, 1 Gigabit
• GXXL—G_Port, mixed mode, LC connector, 1 Gigabit
• FPM—G_Port, small form factor pluggable (SFP) optics, fibre port module, 1 Gigabit
• UPM—G_Port, small form factor pluggable (SFP) optics, universal port module, 2
Gigabit
• GSFM—G_Port, short wave, small form factor, multimode, 1 Gigabit
• GLSR—G_Port, short wave, single mode, MT-RJ connector, 1 Gigabit
• GXXR—G_Port, mixed mode, MT-RJ connector, 1 Gigabit
• GXXL—G_Port, mixed mode, LC connector, 1 Gigabit
• Cooling FAN—Fan module.
• PWR—Power supply module.
• Position—A number representing the FRU chassis position. The chassis (slot) position for a
nonredundant FRU is 0. The chassis positions for redundant FRUs are 0 and 1. For the Director
2/64 chassis, port positions are 0–63. For the Director 2/140 model, port positions are
0–127 and 132–143. Note that for the Director 2/140, ports 128–131 are internal ports and
are not available for external connections.
• Status—The FRU status (Active or Backup).
• Part Number—The FRU part number.
• Serial Number—The FRU serial number.
To display the FRU Properties dialog box for an FRU:
• Click the FRU’s row and select Product > FRU > FRU Properties.
Or
• Double-click an FRU.