HP StorageWorks 2.64 Director Switch User Manual

Page 18

Advertising
background image

Overview

18

•

Configure port address configurations (FICON management style only).

•

Configure SNMP trap recipients and community names.

•

Configure the FICON and Open Systems Management Server features if optional Open Systems

Management Server is installed.

•

Configure Switch Binding if optional SANtegrity Binding feature is installed.

•

Configure Open Trunking if optional Open Trunking feature is installed.

•

Configure the management style between Open Systems and FICON management.

•

Configure the director name, location, description, and contact person.

•

Configure the data speed for the director (Director 2/64 only) and individual ports.

•

Configure threshold alerts for ports.

•

Control individual Fibre Channel ports by blocking/unblocking operation, enabling LIN alerts

and Port Binding, setting data speeds, and running internal and external loopback diagnostics.

•

Display FRU properties such as the FRU name, physical position in the director (chassis slot

number), active/failed state, part number, and serial number.

•

Display information for individual Fibre Channel ports, such as the port name, port number,

Fibre Channel address, operational state, type of port, and login data.

•

Display information on nodes attached to ports.

•

Display port performance and statistics.

•

Display vital product data for the director, such as the system name, description, contact person,

location, status, model number, firmware and Engineering Change (EC) level, and

manufacturer.

•

Enable Alternate Control Prohibited (ACP) to restrict access to FICON director connectivity

parameters.

•

Enable beaconing for ports and the director unit.

•

Enable channel wrap mode (FICON management style only).

•

Maintain a port address library (FICON management style only).

•

Monitor the operational status of the director and each of its hardware field-replaceable units.

•

Perform an initial program load (IPL).

•

Perform maintenance tasks for the director including maintaining firmware levels, enabling the

call-home feature, accessing the director logs, and collecting data to support failure analysis.

•

Reset port operation.

•

Run port diagnostics.

•

Set the date and time on the director.

•

Swap addresses between ports (FICON management style only).

Advertising
This manual is related to the following products: