HP StorageWorks 2.64 Director Switch - Manual (Page 177)

Director Element Manager user guide 177
Field cannot be blank. The data field requires an entry and
cannot be left blank.
Enter appropriate information in the data
field.
File transfer aborted. You aborted the file transfer process. Verify the file transfer is to be aborted,
then click OK to continue.
HAFM error <error number 1
through 8 >.
The HAFM application encountered
an internal error (1 through 8
inclusive) and cannot continue
operation.
Contact the next level of support to report
the problem.
Management server could not log
you on. Verify your username and
password.
An incorrect username or password
(both case sensitive) was used while
attempting to log in to the HAFM
application.
Verify the username and password with the
customer’s network administrator and retry
the operation.
Management server is shutting
down. Connection will be
terminated.
The HAFM application is closing and
terminating communication with the
attached product.
Reboot the HAFM appliance. If the
problem persists, contact the next level of
support.
Invalid character in field. An invalid character was entered in
the data field.
Remove invalid characters from the entry.
Invalid name. One of the following invalid names
was used: CON, AUX, COM1,
COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9,
LPT1, LPT2, LPT3, LPT4, LPT5, LPT6,
LPT7, LPT8, LPT9, NUL, or PRN.
Select a valid name and retry the
operation.
Invalid network address. The IP address specified for the
product is unknown to the domain
name server (invalid).
Verify and enter a valid product IP
address.
Invalid port number. Valid ports
are (0-< nn >).
You have specified an invalid port
number.
Specify a valid port number, in the range 0
to the maximum number of ports on the
product minus 1. For example, for a switch
with 32 ports, the valid port range is 0–31.
Invalid product selection. At the New Product dialog box, an
invalid product was selected.
Select a valid product and retry the
operation.
Table 9 HAFM messages (continued)
Message Description Action