HP StorageWorks 2.64 Director Switch - Manual (Page 183)

Director Element Manager user guide 183
This World Wide Name was not
accepted. The World Wide Name
and Domain ID must be unique in
the Fabric Membership List. You attempted to add a detached
switch to the Fabric Membership List
through the Fabric Binding option
(SANtegrity Binding feature), but an
entry already exists in the Fabric
Membership List with the same
World Wide Name (WWN). Enter a unique World Wide Name for the
switch in the Add Detached Switch dialog
box.
Too many members defined. The maximum number of zone
members that can be defined was
reached. Delete an existing zone member before
adding a new zone member.
You do not have a compatible
version of the management server
software. In order for the HAFM
application to function properly, a
compatible version must be
installed on the client machine.
Click OK to install a compatible
version. The HAFM application version
running on the HAFM appliance
differs from the version running on
the remote workstation (client). A
compatible version must be
downloaded from the HAFM
appliance. Download a compatible version of the
HAFM application to the remote
workstation (client) using the Web install
procedure.
You do not have rights to perform
this action. Configured user rights do not allow
this operation to be performed. Verify user rights with the customer’s
network administrator and change as
required using the Configure Users dialog
box.
You must define an SMTP server
address. An SMTP server address must be
defined and configured for e-mail to
be activated. Define the SMTP server address at the
Configure E-Mail dialog box.
You must define at least one E-mail
address. At least one e-mail address must be
defined and configured for e-mail to
be activated. Define an e-mail address at the Configure
E-Mail dialog box.
You must define at least one remote
network address. At least one IP address for a remote
workstation must be configured for a
remote session to be activated. Define an IP address for at least one
remote workstation at the Remote Access
dialog box.
You must download the HAFM
client via the web install. An attempt was made to download
the HAFM application to a remote
workstation (client) using an
improper procedure. Download a compatible version of the
HAFM application to the remote
workstation (client) using the Web install
procedure.
Zones configured with port
numbers are ignored in Open
Fabric Mode. While in Open Fabric mode, zones
configured using port numbers are
enforced through World Wide
Names. Informational message only–no action is
required.
Table 9 HAFM messages (continued)
Message Description Action