Adding radius clients – HP Identity Driven Manager Software Series User Manual
Page 117
3-49
Using Identity Driven Manager
Adding RADIUS Clients
Adding RADIUS Clients
You can add and update RADIUS clients (ProCurve switches and manually
added clients) on supported RADIUS servers used to enforce RADIUS authen-
tication. This wizard allows you configure consistent RADIUS parameters on
RADIUS servers and HP ProCurve switches. In addition, it detects possible
conflicts between parameters already configured on the servers and the
parameters you are configuring.
The Add RADIUS Client wizard supports the following RADIUS servers:
•
Windows Server 2003
•
Windows Server 2008
•
Network Access Controller 800
To add a RADIUS client:
1.
Display a RADIUS Server tab or a Network Access Controller tab, and
click the Add RADIUS Client button on the window toolbar.
2.
When the Welcome window appears, click
Next.
3.
On the RADIUS Server Selection window, check the check box in the
Selected column for each RADIUS server for which you want to configure
a client. Or, click
Select All to select all listed servers.
Figure 3-35. Add RADIUS Client Wizard, RADIUS Server Selection