HP Identity Driven Manager Software Series User Manual
Page 156
4-12
Using the Secure Access Wizard
Using Secure Access Wizard
c.
Click the Advanced Settings for Wired 802.1X to configure the
advanced settings.
Figure 4-9. Secure Access Wizard, Advanced Settings for Wired 802.1X
d.
Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the
Reset to default values
option is
enabled. Click the link to restore the advanced settings for wired
802.1X defaults.
Advanced 802.1X settings for wired devices include:
TX period
- The period of time the switch waits until retransmission of
EAPOL PDU (default 30 sec.). Valid values are 1-65353.
Logoff period
- The period of time (seconds) after which a client will
be considered removed from the port for a lack of activity. Disabled
by default, valid values are 0-999999999, 0 is disabled
Supplicant timeout
- The authentication server response timeout
(default 30 sec). Valid values are 1 - 300.
Server timeout
- The authentication server response timeout (default
30 sec). Valid values are 1-300.
Max requests
- The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value is 2.