HP Identity Driven Manager Software Series - Manual (Page 154)

4-10
Using the Secure Access Wizard
Using Secure Access Wizard
18. Click Next to continue. The next window display will vary based on the
devices and authentication methods selected.
• If you selected a wireless device, the WLAN selection window dis-
plays, as described in step 9.
• If you selected only wired devices, the authentication configuration
window displays.
–
For 802.1X, go to step 12.
– For Web-Auth, go to step 13.
– For MAC-Auth, go to step 14.
19. The WLAN selection window displays the list of Wireless devices you
selected. Click a device to expand the list to show the WLANs (SSIDs)
configured on the device.
Figure 4-7. Secure Access Wizard, WLAN Selection example
20. Click the check box for each SSID (WLAN) to which the secure access
settings will be applied. (A check mark indicates the SSID is selected)
Click the check box for the device to apply secure access settings to all
SSIDs on the device.
21. Click
Next
to continue to the authentication configuration window:
• For 802.1X, go to step 12 (below).
• For Web-Auth, go to step 13.
• For MAC-Auth, go to step 14.