HP Identity Driven Manager Software Series - Manual (Page 188)

A-8
Using ProCurve Network Access Controller with IDM
Using Local Authentication Directory on ProCurve NAC
Using Local Authentication Directory on
ProCurve NAC
When using the ProCurve NAC 800 appliance for RADIUS authentication and
the IDM Agent, you can enable a Local Authentication Directory for the realm
that the ProCurve NAC supports.
To enable Local Authentication Directory on a ProCurve NAC:
1. Navigate to the Realm that contains the ProCurve NAC appliance, and
then use the right-click menu to select the Modify Realm option, or
Click on the Realm that contains the ProCurve NAC appliance, and then
click the "Modify Realm" button in the Properties tab toolbar.
This launches the Local Authentication Directory dialog.
Figure A-6. Modify Realm dialog with ProCurve NAC device support
2. Click the check box to Enable Local Authentication for ProCurve NAC devices .
A check mark indicates the option is selected.
3. Click OK to save the configuration and close the window.
The Enable Local Authentication option will only appear if:
■ The RADIUS service for the realm is supplied by the RADIUS server
on the ProCurve NAC appliance, and
■ The IDM Agent is installed on the same ProCurve NAC appliance as
the RADIUS server.