HP Identity Driven Manager Software Series - Manual (Page 155)

4-11
Using the Secure Access Wizard
Using Secure Access Wizard
22. The 802.1X configuration window lets you select the authentication
method to be applied in the secure access settings for the selected devices.
Figure 4-8. Secure Access Wizard, 802.1X Configuration display
The configuration options displayed will vary based on the selected device
set: wired, wireless, or both.
a. Select the authentication method for the selected device types. Only
one method can be applied.
For Wired devices the 802.1X authentication options are:
–
Use EAP-capable RADIUS
– Use CHAP (MD5)-capable RADIUS
For Wireless devices the 802.1X authentication options are:
–
WPA - TKIP
– WPA2 - TKIP
– WPA2 - CCMP (AES)
– WPA2 - Mixed mode AES-TKIP
You can refer to the "Using ProCurve Mobility Manager" chapter in
the HP ProCurve Manager Network Administrator’s Guide for a
more complete description of the wireless (WLAN) security settings.
b. In the Client Limit field, select or type the maximum number of clients
to allow on one port simultaneously (default is 1).