HP Identity Driven Manager Software Series - Manual (Page 161)

4-17
Using the Secure Access Wizard
Using Secure Access Wizard
Figure 4-13. Secure Access Wizard, Advanced (wired) Mac-Auth settings
c. Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the
Reset to default values
option is
enabled. Click the link to restore the advanced settings for wired
MAC-Auth defaults.
Advanced MAC-Auth settings for wired devices include:
Address limit - The port's maximum number of authenticated MAC
addresses, default is 1 .
Re-auth period - The re-authentication timeout (in seconds, default 0),
set to 0 to disable re-authentication. Valid values are 0-999999999.
Logoff period
- The period of time (seconds) after which a client will
be considered removed from the port for a lack of activity. Disabled
by default, valid values are 0-999999999, 0 is disabled
Quiet period - The period of time the switch does not try to acquire a
supplicant. Valid values are 0-65535, the default value is 60 sec.
Max requests - The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value is 2.
Server timeout
- The authentication server response timeout (default
30 sec). Valid values are 1-300.
Allow address moves
- Set whether MAC can move between ports. The
default is disabled (No).