Additional requirements, Upgrading from previous versions of pcm and idm, Additional requirements -11 – HP Identity Driven Manager Software Series User Manual
Page 17
1-11
About ProCurve Identity Driven Manager
IDM Specifications
•
Microsoft Network Policy Server on Windows Server 2008 (32-bit)
•
Microsoft Internet Authentication Service (IAS) on Windows Server
2003 (32-bit)
•
FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.2)
•
FreeRADIUS supplied with SuSE Enterprise Linux (9.3 and 10.2)
•
RADIUS on the ProCurve Network Access Controller 800
■
ProCurve Manager Plus software must be installed for IDM to operate.
The IDM software cannot be installed as a separate component. PCM
system requirements are provided in the HP ProCurve Network
Management Installation and Getting Started Guide
.
Additional processing power and additional disk space may be required for
larger networks.
Additional Requirements
■
Implementation of an access control method, using either MAC-auth,
Web-auth, or an 802.1x supplicant application.
For assistance with implementation of RADIUS and access control meth-
ods for use with ProCurve switches, refer to the Access Security Guide
that came with your switch. All ProCurve Switch manuals can also be
downloaded from the ProCurve web site.
For assistance with using RADIUS and 802.1x access control methods,
contact the ProCurve Elite Partner nearest you that can provide ProCurve
Access Control Security solutions.
You can find ProCurve Direct Elite partners
on the Find a Partner
.
■
If you plan to restrict user access to specific network segments, you
will need to configure VLANs within your network. For information
on using VLANs, refer to the HP ProCurve Manager Network Admin-
istrator’s Guide,
or the configuration guides that came with your
switch.
Upgrading from Previous Versions of PCM and IDM
The installation package for PCM 3.0 contains the IDM 3.0 installation files. If
you are running earlier versions of IDM, you must select the IDM option during
the PCM 3.0 install process. This is required to support changes made in the
underlying PCM and IDM databases.