HP XP Array Manager Software - Manual (Page 22)

1. Make sure that Remote Web Console is in Modify mode.
For detailed information about Modify mode, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2. Select a CU number from the LDEV Information tree. The LDEV Detail table displays all LDEVs
in the selected CU.
3. In the LDEV Detail table, select and right-click the normal LDEVs or LUSE volumes to form the
LUSE volume. This displays the Set LUSE Volume pop-up menu.
4. Select Set LUSE Volume.
A dialog box is displayed. If the displayed dialog box asks if you want to perform a LUSE
operation on a volume that has a path definition, follow step
a below. If the displayed dialog
box asks if you want to perform a LUSE operation that will affect more than one SLPR or CLPR,
follow step
b below. If the displayed dialog box is the Set LUSE Confirmation dialog box,
follow step c below.
a. To perform a LUSE operation on a volume that has a path definition, click OK. If a message
appears and asks if you want to perform a LUSE operation that will affect more than one
SLPR or CLPR, go to step
b . If this message does not appear, go to step 5 .
If you do not want to perform a LUSE operation on a volume that has a path definition,
click Cancel. You are returned to the previous dialog box, and then you can retry the
operation.
b. To perform a LUSE operation that will affect more than one SLPR or CLPR, click OK. A
confirmation dialog box appears. Then, go to step
5 .
If you do not want to perform a LUSE operation that will affect more than one SLPR or
CLPR, click Cancel. You are returned to the previous dialog box, and then you can retry
the operation.
c. If the displayed dialog box is the Set LUSE Confirmation dialog box, go to step 5 .
5. Click OK to create the LUSE volume (or Cancel). The new settings that appear on the window
in blue bold italics are not yet registered to the storage system until you click Apply. The LUSE
volumes that have been created but not yet registered to the storage system can be reset to
the state before they were created (see
Resetting an Unregistered LUSE Volume ).
6. Click Apply (or Cancel).
7. Click OK (or Cancel).
When you select and right-click the free LDEVs that you want to use to form a LUSE volume in the
LDEV Detail table, and select the Set LUSE Volume pop-up menu, the Set LUSE Confirmation dialog
box opens. Verify that the LDEVs listed in the confirmation dialog box are the ones you want to
use to create a LUSE volume.
22 Performing LUN Expansion (LUSE) Operations