Creating a luse volume using the volume count box, Creating a luse volume using the volume, Count combo box – HP XP Array Manager Software User Manual
Page 24
1.
Make sure that Remote Web Console is in Modify mode.
For detailed information about Modify mode, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2.
Select a CU number from the LDEV Information tree (in the upper left corner of the LUN
Expansion tab).
3.
Click the arrow button in the Select an LDEV drop-down box (in the lower right corner of the
window). For the LUSE, select the first LDEV from the Free LDEVs list that displays available
LDEVs.
NOTE:
The drop-down lists in the upper right of the Free LDEVs list enable you to narrow
entries in this table. If you select an LDKC and a CU from the LDKC and CU drop-down lists,
the Free LDEVs table displays only the LDEVs belonging to the selected LDKC and CU.
4.
Select one or more additional normal LDEVs or LUSE volumes for the LUSE volume. Click Add
to move the selected LDEVs from the Free LDEVs list to the Expanded LDEVs list.
5.
To delete an LDEV from the Expanded LDEVs list and move it back to the Free LDEVs list, select
one or more volumes. Click Delete.
6.
Click Set.
A dialog box is displayed. If the displayed dialog box asks if you want to perform a LUSE
operation on a volume that has a path definition, follow step
below. If the displayed dialog
box asks if you want to perform a LUSE operation that will affect more than one SLPR or CLPR,
follow step
below. If the displayed dialog box is the Set LUSE Confirmation dialog box,
follow step
below:
a.
To perform a LUSE operation on a volume that has a path definition, click OK. If a message
appears and asks if you want to perform a LUSE operation that will affect more than one
SLPR or CLPR, go to step
. If this message does not appear, go to step
If you do not want to perform a LUSE operation on a volume that has a path definition,
click Cancel. You are returned to the previous dialog box, and then you can retry the
operation.
b.
To perform a LUSE operation that will affect more than one SLPR or CLPR, click OK. A
confirmation dialog box opens. Then, go to step
If you do not want to perform a LUSE operation that will affect more than one SLPR or
CLPR, click Cancel. You are returned to the previous dialog box, and then you can retry
the operation.
c.
If the displayed dialog box is the Set LUSE Confirmation dialog box, go to step
.
7.
Click OK (or Cancel). The new settings that appear on the window in blue bold italics are
LUSE volumes that have been created or registered to the storage system. Click Apply to
register these LUSE volumes. These LUSE volumes can be reset to the state before they were
created (see
Resetting an Unregistered LUSE Volume
).
8.
Click Apply (or Cancel).
9.
Click OK (or Cancel).
Creating a LUSE Volume Using the Volume Count Box
To create a LUSE volume using the Volume Count box:
1.
Make sure that Remote Web Console is in Modify mode.
For detailed information about Modify mode, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2.
Select the CU number to create the LUSE volume from the LDEV information tree.
24
Performing LUN Expansion (LUSE) Operations