HP XP Array Manager Software - Manual (Page 35)

The following example shows the spreadsheet that can be used for creating three LUSE volumes:
•
The first LUSE volume is configured as follows:
Number of LDEVs to be combined: three ◦
◦ LDEV:CU:LDKC numbers of above three LDEVs: 00:00:00, 00:00:01 and 00:00:02
•
The second LUSE volume is configured as follows:
Number of LDEVs to be combined: three ◦
◦ LDEV:CU:LDKC numbers of above three LDEVs: 00:00:10, 00:00:21 and 00:00:22
•
The third LUSE volume is configured as follows:
Number of LDEVs to be combined: two ◦
◦ LDEV:CU:LDKC numbers of above two LDEVs: 00:10:00 and 00:10:01
The example of a spreadsheet follows:
#!Version 05_03_01,CLI_LUSE,VolumeOperation,;
[SerialNumber]
65536,;
[Expansion]
00,00,00,;
+,00,00,01,;
+,00,00,02,;
00,00,10,;
+,00,00,21,;
+,00,00,22,;
00,10,00,;
+,00,10,01,;
Releasing LUSE Volumes
You can release LUSE volumes by specifying a spreadsheet that includes the Release tag when
you execute the CFLSET command using the CFL Extension.
Write parameters required for releasing LUSE volumes in the Release tag. HP recommends that
you arrange the number of the top LDEV:CU:LDKC of LUSE volumes in ascending order when
writing parameters in the Release tag.
“Release Tag Parameters” (page 35) shows the parameters
that can be set for the Release tag.
Table 18 Release Tag Parameters
Content Item Column in Spreadsheet
LDKC number of the top LDEV in a LUSE
volume. LDKC A
CU number of the top LDEV in a LUSE
volume. CU B
LDEV number of the top LDEV in a LUSE
volume. LDEV C
The following example shows the spreadsheet that can be used for releasing 3three LUSE volumes.
LUSE volumes to be released are as follows:
•
Number of LUSE volumes: three
•
Top LDEV:CU:LDKC numbers of threeLUSE volumes: 00:00:00, 00:00:10 and 00:10:02
Releasing LUSE Volumes 35