Removal and replacement tools, Server warnings and cautions – HP ProLiant MicroServer User Manual
Page 12
Hardware options installation 12
Removal and replacement tools
In performing any hardware configuration procedures, you might need the following items:
•
System screwdriver (secured to the front panel door)
All hardware screws used in the server can be removed or fastened by using the system screwdriver.
•
Spare screws, located on the back side of the front panel door.
The following references and software tools might also be used:
•
IPMI Event Log
•
Diagnostics software
Server warnings and cautions
WARNING:
To reduce the risk of personal injury from hot surfaces, allow drives and internal
system components to cool before touching them.
CAUTION:
The server must always be operated with the system covers on. Proper cooling is not
achieved when the system covers are removed.
CAUTION:
When installing hardware or performing maintenance procedures requiring access
to internal components, HP recommends that you first back up all server data to avoid loss.