Enabling the trusted platform module – HP ProLiant MicroServer User Manual
Page 30
Hardware options installation 30
•
Do not save the recovery key/password on the encrypted hard drive.
Enabling the Trusted Platform Module
Press the F10 key to access BIOS Setup. See the BIOS setup information for the specific procedure to enable
the TPM on a ProLiant 100 Series server or a ProLiant MicroServer.
CAUTION:
When a TPM is installed and enabled on the server, data access is locked if you fail
to follow the proper procedures for updating the system or option firmware, replacing the system
board, replacing a hard drive, or modifying OS application TPM settings.
For more information on firmware updates and hardware procedures, see the HP Trusted Platform Module
Best Practices White Paper on the HP website
.
For more information on adjusting TPM usage in BitLocker™, see the Microsoft website