Network menu – HP Power Distribution Unit Management Module User Manual
Page 35
HP PDR Management Module web interface 35
To delete a user account:
1.
Select the Delete checkbox for the user account that is to be removed.
2.
Click Delete Users to delete the user account. The account is removed and no longer appears on the
User Accounts screen.
Network menu
Click Network in the left navigation frame to access the Network screen. This screen enables
administrators to configure network settings for the management module.
The management module MAC address is displayed on the Network screen for informational purposes.
To configure the network settings:
1.
Select a radio button to enable or disable BOOTP. By default, BOOTP is enabled.
2.
Enter the IP address of the management module.
3.
Enter the network mask of the management module.
4.
Enter the default gateway of the management module.
5.
In the Network Time Protocol (NTP) field, select Enable to enable NTP, or select Disable to set the
date and time manually.
6.
If you enabled NTP in step 5:
a.
Enter the IP address of the primary NTP server.
b.
Enter the IP address of the secondary NTP server.
c.
Select the time zone from the dropdown box.