Create custom cd/dvd labels – HP Photosmart C4270 All-in-One Printer User Manual
Page 40
To print a photo on photo paper
1.
Remove all paper from the input tray, and then load the photo paper print side down.
2.
On the File menu in your software application, click Print.
3.
Make sure the HP All-in-One is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5.
Click the Features tab.
6.
In the Basic Options area, select the appropriate photo paper type from the Paper
Type drop-down list.
7.
In the Resizing Options area, click the appropriate paper size from the Size list.
If the paper size and paper type are not compatible, the HP All-in-One software
displays an alert and allows you to select a different type or size.
8.
In the Basic Options area, select a high print quality, such as Best or Maximum
dpi from the Print Quality drop-down list.
9.
In the HP real life technologies area, click the Photo fix drop-down list and select
from the following options:
•
Off: applies no HP real life technologies to the image.
•
Basic: automatically focuses the image; moderately adjusts image sharpness.
•
Full: automatically lightens dark images; automatically adjusts sharpness,
contrast, and focus of images; automatically removes red-eye.
10.
Click OK to return to the Properties dialog box.
11.
If you want to print the photo in black and white, click the Color tab and select the
Print in grayscale check box.
12.
Click OK, and then click Print or OK in the Print dialog box.
NOTE:
Do not leave unused photo paper in the input tray. The paper might start to
curl, which could reduce the quality of your printout. Photo paper should be flat before
printing.
Create custom cd/dvd labels
You can create custom labels for your CDs and DVDs on the HP All-in-One by following
the steps below. Or, to create custom CD and DVD labels online, go to
follow the prompts.
To create custom CD/DVD labels
1.
Make sure you have CD/DVD tattoo paper loaded in the input tray.
2.
On the File menu in your software application, click Print.
3.
Make sure the HP All-in-One is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5.
Click the Features tab.
Perform special print jobs
37