Maintain the hp all-in-one, Clean the hp all-in-one, Clean the exterior – HP Photosmart C4270 All-in-One Printer User Manual

Page 66: Clean the glass, 11 maintain the hp all-in-one

Advertising
background image

11 Maintain the HP All-in-One

The HP All-in-One requires little maintenance. Sometimes you might want to clean the
glass and lid backing to remove surface dust and ensure that your copies and scans
remain clear. You will also need to replace, align, or clean your print cartridges from time
to time. This section provides instructions for keeping the HP All-in-One in top working
condition. Perform these simple maintenance procedures as necessary.
This section contains the following topics:

Clean the HP All-in-One

Print a self-test report

Work with print cartridges

Clean the HP All-in-One

To ensure that your copies and scans remain clear, you might need to clean the glass
and lid backing. You might also want to dust the exterior of the HP All-in-One.
This section contains the following topics:

Clean the exterior

Clean the glass

Clean the lid backing

Clean the exterior

Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the
case. The interior of the HP All-in-One does not require cleaning. Keep fluids away from
the control panel and the interior of the HP All-in-One.

CAUTION:

To avoid damage to the exterior of the HP All-in-One, do not use alcohol

or alcohol-based cleaning products.

Clean the glass

Fingerprints, smudges, hair, and dust on the main glass surface slow down performance
and affect the accuracy of the copy and scan features.

To clean the glass

1.

Turn off the HP All-in-One, unplug the power cord, and raise the lid.

2.

Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.

CAUTION:

Do not use abrasives, acetone, benzene, or carbon tetrachloride on

the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.

3.

Dry the glass with a dry, soft, lint-free cloth to prevent spotting.

4.

Plug in the power cord, and then turn on the HP All-in-One.

Maintain the HP All-in-One

63

Maintain the H

P

A

ll-in-One

Advertising