HP Officejet 6210v All-in-One Printer - Manual (Page 88)

Note If you press Start Fax Color but the sender sent the fax in black and
white, the HP all-in-one prints the fax in black and white.
Set the date and time
You can set the date and time from the control panel. When a fax is transmitted, the
current date and time are printed along with the fax header. The date and time format
is based on the language and country/region setting.
Note If your HP all-in-one loses power, you will need to reset the date and time.
1 Press Setup .
2 Press 4 , and then press 1 .
This selects Basic Fax Setup and then selects Date and Time .
3 Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.
The underline cursor is presented initially beneath the first digit; it automatically
advances to the next digit when you press a button. The time prompt
automatically appears after you enter the last digit of the date.
4 Enter the hours and minutes.
5 If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM.
The new date and time settings appear on the control panel display.
Set the fax header
The fax header prints your name and fax number on the top of every fax you send.
We recommend that you set up the fax header by using the Fax Setup Wizard
(Windows users) or the Setup Assistant (Macintosh users) during the HP Image
Zone software installation.
You can also set up or change the fax header from the control panel.
The fax header information is required by law in many countries/regions.
1
Press Setup .
2 Press 4 , and then press 2 .
This selects Basic Fax Setup and then selects Fax Header .
3 Enter your personal or company name. You can enter up to 25 characters.
For information on entering text from the control panel, see
Enter text and symbols .
4 Press OK .
5 Enter your fax number by using the numeric keypad. You can enter up to 19 digits.
6 Press OK .
You might find it easier to enter fax header information by using the HP Director that
came with your HP Image Zone software. In addition to entering fax header
information, you can also enter cover page information that will be used when you
send a fax from your computer and attach a cover page. For more information, see
the onscreen HP Image Zone Help that came with your HP Image Zone software.
Enter text and symbols
You can enter text and symbols from the control panel by using the keypad on the
control panel when you set up speed-dial entries and the fax header information.
User Guide 85