HP ProLiant DL580 G3 Server User Manual
Page 94
Advertising
94
HP ProLiant DL580 Generation 3 Server User Guide
For information about iLO technology, refer to "Integrated Lights-Out
Technology (on page
To install the RILOE II board:
IMPORTANT: Install the RILOE II board into slot 7 for ease of
cabling.
1.
Power down the server ("Powering down the server" on page
2.
Remove the access panel ("Removing the access panel" on page
3.
Install the RILOE II board into slot 7.
4.
Connect the RILOE II cable ("RILOE II cabling" on page
) to the 30-pin
connector on the system board.
5.
Connect the RILOE II cable to the RILOE II board.
Advertising