HP 120 Color Copier - Manual (Page 12)

8 Chapter 3—Load paper or transparency film, or load originals
HP Color Copier
5 Push the input tray back in until it stops.
6 To prevent paper from possibly falling off the tray, pull out the output-tray extender.
Review tips for loading specific types of paper
The following sections provide guidelines for loading certain types of paper and film. For
best results, adjust the paper settings each time you change paper types. For more
information, see “Set the paper type.”
HP papers
• HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting side of the
paper, and insert paper with the arrow side facing up.
• HP Premium Photo Paper: Load the glossy (print) side down. Always load at least
five sheets in the input tray. You can place the photo-paper sheets on top of plain
paper in the input tray.
• HP Premium Plus Photo Paper: Always load at least five sheets in the input tray. You
can place the photo-paper sheets on top of plain paper in the input tray.
• HP Premium or Premium Rapid-Dry Inkjet Transparency Film: Insert the film so
that the white transparency strip, with arrows and the HP logo, is on top and is
going into the tray first.
Cam.book Page 8 Friday, February 25, 2000 11:32 AM