HP 120 Color Copier - Manual (Page 29)

Chapter 5—Maintain the unit 25
HP Color Copier
Replace the black print cartridge
Follow these steps to replace the cartridge.
1
Turn on the unit, and open the print-cartridge access door (lift up the handle located
just above the output tray).
The carriage moves to the center of the unit.
2 After the carriage stops moving, flip up the print-cartridge latch on the right, grasp
the top of the old print cartridge (the thinner one), and pull it up and out of its slot.
3 Remove the new black print cartridge (the thinner one) from its packaging and,
being careful to touch only the black plastic, gently remove both the green pull tab
and blue tape covering the nozzles.
CAUTION
Do not touch the gold-colored contacts.
Cam.book Page 25 Friday, February 25, 2000 11:32 AM