HP ProLiant DL388e Gen8 Server - Manual (Page 11)

Component identification 11
Item Description
5 Rear LFF drive 1 (optional)
6 Rear LFF drive 2 (optional)
7 Power supply 1
8 Power supply 2 (optional)
9 NIC connectors (4-1)
10 Serial connector
11 Video connector
12 USB 2.0 connectors
13 iLO 4 connector
* For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe riser board slot
definitions (on page 12 )."
Rear panel LEDs and buttons
Item Description Status
1 NIC status LED Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network
active
Off = No network activity
2 NIC link LED Solid green = Link exists
Off = No link exists
3 UID button/LED Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote
management or firmware upgrade in progress
Off = Deactivated
4 Power supply LED Solid green = Normal
Off = One or more of the following conditions
exists:
• Power is unavailable
• Power supply failed
• Power supply is in standby mode
• Power supply error