HP ProLiant DL388e Gen8 Server - Manual (Page 53)

Hardware options installation 53
10. Route the optical drive cable along the side of the system board, and then connect the cable to the
system board.
11. Install the primary PCI riser cage (" Install the PCI riser cages " on page 25 ).
12. Install the air baffle (on page 23 ).
13. Install the access panel (on page 23 ).
14. Install the server into the rack (" Installing the server into the rack " on page 32 ).
15. Power up the server (on page 19 ).
Hot-plug fan module option
To provide sufficient airflow to the system if a primary fan fails, the server supports redundant fans.
Fan population guidelines