HP ProLiant DL388e Gen8 Server - Manual (Page 52)

Hardware options installation 52
Optical drive option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
To install the component:
1. Power down the server (on page 19 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 19 ).
o Remove the server from the rack (on page 21 ).
4. Remove the optical drive blank.
Retain the blank for future use.
5. Remove the access panel (on page 22 ).
6. Remove the air baffle (on page 23 ).
7. Remove the primary PCI riser cage (" Remove the PCI riser cages " on page 24 ).
8. Install the optical drive into the bay.
9. Connect the optical drive cable to the optical drive.