Discovery status, Selecting networks, Discovery status -2 – HP TopTools for Hubs and Switches User Manual
Page 36: Selecting networks -2
4-2
Discovering Your Devices
Beginning Discovery
Figure 4-1. Status Page of Settings for Discovery
Discovery Status
The Status page shows the following information about network discovery:
•
The date and time the last discovery finished
•
The number of network objects that have not been processed yet
•
If discovery is scheduled, how often it is set to run, and when
You can manually start discovery by clicking on the
Start Discovery button at
the top of the page.
Save your settings by clicking on the
Save Settings button.
Selecting Networks
Click on the
Networks tab to select the networks whose component devices
you want to add to the device database. You can specify a range of subnets,
for example, 10.4.8.0 - 10.4.15.0. You can also specify a particular network and
subnet mask. The subnet mask is used to determine the range of addresses in
your network.
To select a network, double click on it in the list of
Known Networks. The box
to the right will be checked and the network added to the list of networks to
search.
To remove a network, double click on the network in the
Known Networks list.