HP TopTools for Hubs and Switches - Manual (Page 69)

Group Policies
General Configuration Policies
7-7
General Configuration Policies
SNMP System Information
To configure SNMP Information for a group, click on the General button in the
Configuration Policies main page. The General Polices page for that group
displays.
Three SNMP variables for the selected group are listed in the SNMP System
Information box:
■ sysContact—The person to contact about this group of devices
■ sysLocation—The location of this group of devices.
■ sysName—The name for the group of devices.
If <keep device setting> is selected, the current value stored in the switch is
not modified.
Figure 7-6. General Policies Page Showing SNMP System Information
To modify a field, select the field in the SNMP system Information box, then
check the
Enabled check box below if it is not currently checked. Enter the
new information in the field to the right of the Enabled check box and click