HP TopTools for Hubs and Switches User Manual
Page 66
7-4
Group Policies
Creating Groups
Figure 7-3. Group Configuration - Modify Group Page
Adding a Device to a Group
To add a device to a group, click on the
Add Device button. Select a group from
the
Source Group list box. All the devices in that group will be displayed in the
box below. Select a device in the
Source Group list box, then click the Add-->
button. The device appears in the
Target Group list box. Repeat for as many
devices as you want to move.
N o t e
All the devices displaying the same friendly name but a different IP address
should be added to the same group. For example, if you see two devices with
the friendly name of “Switch1” but one has an IP of 200.1.1.1 and one has an
IP address of 200.1.1.2, they should both go in the same group.
When you are finished with your changes, click the
OK button. Click on Save
Group Settings in the main Group Configuration page.
Clicking
Cancel removes all your changes.
N o t e
A device can only be a member of one group.