HP Systems Insight Manager - Manual (Page 215)

Default values
If a parameter is missing in the hosts file, the default is applied. The following lists the parameters
that can be used in hosts files:
Table F-4 Hosts file default parameters
Description Value Keyword
Unknown (Default) • Application
• Cluster
• Complex
• Desktop
• Enclosure
• Environmental Monitor
• Handheld
• Hub
• KVM Switch
• Management Processor
• Notebook
• Partition
• Power Distribution Unit
• Power Supply
• Printer
• Rack
• Resource Partition
• Remote Access Device
• Router
• Server
• Shared Resource Domain
• Storage Device
• Switch
• Tape Library
• Thin Client
• UPS
• Unknown
• Unmanaged
• Workstation
TYPE
Disabled (Default)
Enabled
0
1
SNMP
Disabled (Default)
Enabled
0
1
HTTP
System default (Default) 0
Greater than 0
SNMP_TIM
System default (Default) 0
Greater than 0
SNMP_RET
Read only (Default) Public
<Community String >
SNMP_MON
No default <Community String> SNMP_CON
To use a hosts file to specify systems for an automatic discovery, add the hosts file name to the
Ping inclusion ranges, system (hosts) names, templates, and/or hosts files
section of the
Default values 215