HP XP Racks - Manual (Page 26)

8. Verify your settings. To make a correction, select the setting, right-click, and click Modify.
9. Click Apply to save your changes.
Configuring host mode options
Configuring host mode options is the last main task in the system configuration. Completion of this
task ensures that the host mode option setting are correct. The settings vary depending on the
whether the system is a standard or cluster implementation.
Prerequisites
Before you begin, make sure you have:
•
Added the ID for the quorum disk to the storage systems (see “Adding the ID for the quorum
disk to the storage systems” (page 25) ).
Procedure
Use the following host mode options for your system:
•
If using VMware or Windows, set host mode option 57 on the host group where VMware or
Windows reside.
•
If using software that uses a SCSI-2 Reservation, set host mode option 52 on the host groups
where the executing node and standby node reside.
For more information on host mode options, see the HP XP P9000 Provisioning for Open Systems
User Guide.
26 System configuration