HP XP Racks - Manual (Page 89)

Description Item
Port - GID – LUN (LDKC number: CU number: LDEV number) of the selected volume. The following
symbols might appear at the end of the LDEV number: P-VOL
•
# (e.g., 00:00:3C #): Indicates the volume is an external volume.
For more information about external volumes, see the HP XP P9000 External Storage for Open
and Mainframe Systems User Guide.
•
X (e.g., 00:00:3C X): Indicates the volume is a Thin Provisioning virtual volume.
For more information about virtual volumes, see the HP XP P9000 Provisioning for Open Systems
User Guide.
Not used for ESAM, Never is default, meaning P-VOL is never fenced. P-VOL Fence Level
The number of the tracks 1-15 for the resync operations (default = 15). Initial copy parameter. Copy Pace
Scheduling order for the resync operation (1-256, default = 32). Initial copy parameter. Priority
Change attribute
to ESAM •
Yes: Changes a Continuous Access Synchronous Sync pair to an ESAM pair.
•
No: Does not change a Continuous Access Synchronous Sync pair to an ESAM pair.
For more information, see “Changing Continuous Access Synchronous pairs to ESAM pairs ”
(page 39) .
Used to specify a quorum disk ID when changing a Continuous Access Synchronous Sync pair to
an ESAM pair. The list shows the quorum disk ID and the RCU information such as the serial
number, controller ID, and model name. Quorum Disk ID
Pairsplit-S dialog box
Use this dialog box to release a pair.
For instructions, see
“Releasing a pair” (page 38) .
Pair Operation window 89