HP XP Racks - Manual (Page 86)

Description Item
1. MCU receives a request to create a pair.
2. MCU receives a request to start the paircreate operation.
3. The paircreate operation is started according to the conditions of initial copy
priority and maximum initial copy activities.
4. The paircreate operation is completed (the progress of the operation reaches
100%).
The unit of measurement used for storing differential data. Difference Management
Values: Cylinder or Track
The quorum disk ID assigned to the ESAM pair. Quorum Disk ID
Shows the online volume. VOL Access
For more information, see “Possible VOL Access values for pairs” (page 83) .
The Consistency group number for a Synchronous-C or Multi-C pair. Sync CT Group
If the consistency group number is bracketed ([1]), the consistency group consists
of multiple primary and secondary storage systems.
Select to refresh the Pair Operation window after the Detailed Information dialog
box closes. Refresh the Pair Operation window
after this dialog box is closed
Shows pair status for the pair in *the row above. Previous
Shows pair status for the pair in the row below. Next
Updates the information. Refresh
Closes the dialog box. Close
Paircreate(ESAM) dialog box
Use this dialog box to create a pair.
For instructions, see
“Creating an ESAM pair ” (page 33) .
86 ESAM GUI reference