HP XP Racks User Manual
Page 85
Description
Item
P-VOL and S-VOL
•
Port - GID – LUN(LDKC number: CU number: LDEV number).
The following symbols might appear at the end of the LDEV number:
- # (e.g., 00:00:3C #): Indicates the volume is an external volume.
For more information about external volumes, see the HP XP P9000 External
Storage for Open and Mainframe Systems User Guide.
- X (e.g., 00:00:3C X): Indicates the volume is a Thin Provisioning virtual
volume.
For more information about virtual volumes, see the HP XP P9000 Provisioning
for Open Systems User Guide.
•
Emulation type.
•
Capacity in MB (to two decimal places).
•
The number of blocks.
The CLPR number and name of the local volume.
CLPR
Host group name where the local volume is connected.
Group Name
ESAM pair status. The split/suspend type is shown as well, if the pair is split or
suspended. For information about the ESAM pair status, see
Pair Status
The percentage of synchronization or consistency between the pair volumes.
Pair Synchronized
If you are viewing S-VOL information, the percentage for all pair statuses except
COPY is shown.
If you are viewing P-VOL information, the percentage for all pair statuses is shown.
Note: If the operation is waiting to start, (Queueing) is shown.
Serial number and path group ID of the paired storage system.
S/N and ID
If you selected a P-VOL to open this dialog box, the information about the RCU
will appear.
If you selected an S-VOL to open this dialog box, the information about the MCU
will appear.
Controller ID and model name of the paired storage system.
Controller ID
•
P9500 controller ID: 6
•
XP24000 controller ID: 5
Channel type of the path interface between the storage systems.
MCU-RCU Path
Pair type. ESAM indicates that this pair is an ESAM pair.
Update Type
1-15 tracks (disabled when the status becomes PAIR).
Copy Pace
1-256 (disabled when the status becomes PAIR).
Initial Copy Priority
Not used for ESAM pairs.
P-VOL Fence Level
Not Received appears; and write operations to the S-VOL are rejected.
S-VOL Write
Date and time that the pair was created.
Paired Time
Date and time that pair status was last updated.
Last Updated Time
Time taken to copy pairs. The time shown for this item differs from the time shown
in the Copy Time on the History window. The difference is as follows:
Pair Copy Time
•
Pair Copy Time: Time from step 3 to 4 of the pair creating procedure.
•
Copy Time: Time from step 1 to 4 of the pair creating procedure.
Pair Copy Time is determined by the following:
Pair Operation window
85