AltiGen comm 600H - Manual (Page 17)

Alti-IP 600H Manual 7
C H A P T E R 2
System & Network Requirements
System Requirements
• AltiWare OE 4.5A or higher
Note: A lower version of AltiWare may cause the IP phone to lose
several advanced features, resulting in use as a very basic
H.323 phone.
• AltiGen OE 4.5A Gatekeeper or higher (to support Plug and Play
functionality)
Network Requirements
• Network connection — the IP phone must have TCP/IP connection to
the related AltiWare system
Important: Make sure a switch is used, rather than a hub, in the corporate
LAN.
• DHCP Server (to get dynamically IP address when necessary)
• TFTP Server (to update the IP phone firmware when necessary)
• GATEKEEPER (for Plug and Play feature)
AltiAdmin/ACM Admin Configuration
Requirements
• The Alti-IP 600H requires a virtual extension to be created as an IP
extension in AltiAdmin to handle call processing. Refer to the “Setting
Up IP Extensions” chapter in the AltiWare OE/ACC System
Installation & Administration Manual or ACM System Administration
Manual for detailed instructions on how to set up an IP Extension to
manage the IP phone.
• The IP Phone settings must be pre-configured in AltiAdmin/ACM
Admin before setting up configuration for the Alti-IP 600H.