AltiGen comm 600H - Manual (Page 46)

Alti-IP 600H Manual 36
Line Park A parked call line
appearance can be
assigned as a
programmable “Parked
Call Line” button by the
administrator. When
connected to a caller, the
call can be parked by
pressing the Parked Call
Line button. If a call is
parked at a Parked Call
Line, its LED light is on.
The call can be picked up
by pressing the Parked
Call Line button. • Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Line
Park.
• When configured by the
administrator, the IP phone can
play an audible beep or one of 6
different ring tones when a call is
parked at the Parked Call Line.
• When configured by the
administrator, an alternate way to
pick up a Parked Call Line call is to
use #51 <line number> if the
Parked Call Line is not assigned to
the phone.
• The LED for Parked Call Line
button will be lit up and turns off
when the parked call is picked up,
the caller hangs up, or the call is
routed to IVR/Auto Attendant.
Mute While on a call, mutes
conversation. • Feature does not require special
configuration to work.
Program Soft
Keys Associates Soft Key with
a speed dial number or
feature code that can be
configured directly on the
IP Phone. • Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Phone
Setting. The user will be able to
configure this key directly from the
IP Phone by pressing * * 6
ENTER.
Redial Redials the last number
dialed. • Feature does not require special
configuration to work.
• Redials up to last 16 calls.
• Redials up to 32 digits.
Release Releases a call from the
connected state. • Feature does not require special
configuration to work.