GE P2B940DEFWW - Manual (Page 15)

49-85212-4
15
Oven Controls
USING THE O
VEN:
O
ven Contr
ols
1. Convection Cooking Modes: Convection
cooking modes use increased air circulation
to improve performance. The type of benefit
GHSHQGVRQWKHPRGH<RXURYHQKDVWKHIROORZLQJ
FRQYHFWLRQFRRNLQJPRGHV %DNH0XOWL5DFNDQG
5RDVW6HHWKH&RRNLQJ0RGHVVHFWLRQIRUPRUH
information.
2. Traditional Cooking Modes: <RXURYHQKDV
WKHIROORZLQJWUDGLWLRQDOFRRNLQJPRGHV %DNH%URLO
+L%URLO/RDQG:DUP6HHWKH&RRNLQJ0RGHV
section for more information.
3. Clean: <RXURYHQKDVD6HOI&OHDQPRGH6HHWKH
Cleaning the Oven section for important information
about using this mode.
4. Start: 0XVWEHSUHVVHGWRVWDUWDQ\FRRNLQJ
cleaning, or timed function.
5. Cancel/Off: Cancels ALL oven operations except
the clock and timer.
6. Cook Time: Counts down cooking time and turns
off the oven when the cooking time is complete.
Press the Cook Time pad, use the number pads to
program a cooking time in hours and minutes, then
press Start. This can only be used with Traditional
%DNH&RQYHFWLRQ%DNH&RQYHFWLRQ%DNH0XOWLDQG
Convection Roast.
7. Clock: Sets the oven clock time. Press the 9 and
0 SDGVDQGKROGIRUVHFRQGVRUSUHVVSet Clock
SDG RQVRPHPRGHOV 8VHWKHQXPEHUSDGVWR
program the clock. Press Start to save the time.
8. Timer: Works as a countdown timer. Press the
Timer pad and the number pads to program the
time in hours and minutes. Press the Start pad.
The oven will continue to operate when the timer
countdown is complete. To turn the timer off press
the Timer pad.
9. Delay Time: Delays when the oven will turn
RQ8VHWKLVWRVHWDWLPHZKHQ\RXZDQWWKHRYHQ
to start. Press the Delay Time pad and use the
number pads to program the time of day for the
oven to turn on then press Start. Press the desired
cooking mode and temperature then press Start. A
cook time may also be programmed if desired. This
FDQRQO\EHXVHGZLWK7UDGLWLRQDO%DNH&RQYHFWLRQ
%DNH0XOWL5DFN&RQYHFWLRQ5RDVWDQG6HOI&OHDQ
NOTE: When using the delay time feature, foods
WKDWVSRLOHDVLO\²VXFKDVPLONHJJVILVKVWXIILQJV
SRXOWU\DQGSRUN²VKRXOGQRWEHDOORZHGWRVLWIRU
PRUHWKDQKRXUEHIRUHRUDIWHUFRRNLQJ5RRP
temperature promotes the growth of harmful bacteria.
%HVXUHWKDWWKHRYHQOLJKWLVRIIEHFDXVHKHDWIURP
the bulb will speed harmful bacteria growth.
10. Probe: 0RQLWRUVLQWHUQDOIRRGWHPSHUDWXUH
and turns the oven off when the food reaches
the programmed temperature. Insert the probe,
program the cooking mode, and program the probe
WHPSHUDWXUH6HHWKH&RRNLQJ0RGHVVHFWLRQIRU
more information. The probe can only be used with
7UDGLWLRQDO%DNHDQG&RQYHFWLRQ5RDVW
11. Oven Light(s): 7XUQVWKHRYHQOLJKW V RQRURII
12. Lock Controls: Locks out the control so that
pressing the pads does not activate the controls.
Press and hold the Lock Controls pad for three
seconds to lock or unlock the control. Cancel/Off is
always active, even when the control is locked.
13. Warming Drawer: Will keep hot, cooked foods
at serving temperature. Press the Warming Drawer
SDG8VHWKHQXPEHUSDGWRVHOHFWWKHWHPSHUDWXUH
setting. Press 1 for Low, 2
IRU0HGLXPRU3IRU+LJK
then press Start. Push Warming Drawer RQRIIWR
turn off warming drawer.
14. Remote Enable:
CONNECTING YOUR OVEN
Off - Oven is not connected. Open the app then
press and hold Remote Enable SDGIRUVHFRQGV
to begin the connecting process.
Slow flash - Oven is in discovery mode and looking
for a network.
Rapid flash - An error occurred during the
connecting process.
Solid - %RWKRYHQVDUHFRQQHFWHGWRWKHQHWZRUN
and can be remotely controlled by a connected
mobile device when in operation, but cannot be
started remotely
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely, press the
Remote Enable pad and the light above the
Remote Enable pad will turn on. Either oven can
now be remotely started with a connected device.
Opening any oven door or turning off either oven
will turn off the light above the Remote Enable pad.
The light above the Remote Enable pad must be
lit to start the oven remotely. The light above the
Remote Enable pad is not required to change the
oven settings or to turn either oven off.
After using the oven, remember to verify that the
light above the Remote Enable pad is on if you
wish to start an oven remotely in the future.