GE PV970NSS - Manual (Page 22)

22
49-80549-2
Installation Instructions
8 INSTALL FILTERS
Charcoal Filter
Insert the charcoal filter into the opening. Push the
latch on both sides toward the center and engage
the flange.
Metal Grease Filter
• Remove the protective film on the grease filter.
• Fit the tabs at the end of the filter into the slots in
left side of the filter opening. Lift up the right side
of the filter and push gently until the filter locks
into place. Make sure the filter lock is in the closed
position to secure the filter.
• To remove the filter, pull downward on the filter
lock to release.
9 FINALIZE INSTALLATION
• Remove all tape and packaging materials.
• Refer to the Operating Instructions in this manual
to operate the hood.
,167$//$7,21³5(&,5&8/$7,1*