Outside back exhaust, Installation instructions c, Installation overview – GE JVM3160DFWW User Manual
Page 21: 21 attach the mounting plate to the wall c2
OUTSIDE BACK EXHAUST
+RUL]RQWDO'XFW
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
C1
Popcorn
Convenience
Cooking
Express Coo
k
Potato
Start
Pause
Cancel
Off
Beverage
Reheat
Set
Clock
Turntable
Surface
Light
Vent
Add
30 Sec.
Power
Level
0
8
5
2
7
4
1
9
6
3
Cook
Time
Defrost
Weight/Tim
e
Timer
On/Off
INSTALLATION OVERVIEW
C1. Prepare Rear Wall
C2. Attach Mounting Plate to Wall
C3. Prepare Top Cabinet
C4. Adjust Blower
C5. Mount the Microwave Oven
Installation Instructions
C
21
ATTACH THE MOUNTING PLATE
TO THE WALL
C2
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
Remove the toggle wings from the bolts.
Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to
3
ø
4
s onto each bolt.
1
2
You need to cut an opening in the rear wall for outside
exhaust.
Read the instructions on the REAR WALL TEMPLATE.
Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the mounting
plate.
Cut the opening, following the instructions of the
REAR WALL TEMPLATE.