GE 45610WB GE Z-Wave Add On Auxiliary Switch - Manual (Page 2)

This auxiliary switch is a component of the GE Z-Wave ®
lighting control system and is designed to work with the
45607 Dimmer (ZW3002), 45612 Dimmer (ZW3003) and
45609 On/Off Relay Switch (ZW4001). Use one auxiliary
switch for 3-way control such as the top and bottom of a
staircase (1 load/light & 2 switches) with one of the above
Z-Wave devices. Two or three auxiliary switches can be
used with these dimmers and switches to create a 4-way (1
load/light & 3 switches) or 5-way (1 load/light & 4 switches)
lighting system.
The 45610 auxiliary switch is not Z-Wave enabled
and must be used exclusively with one of the Z-Wave
devices listed above. It is not designed for stand-
alone use to control an electrical load. It does not
have Z-Wave functionality and does not act as a
repeater in your Z-Wave control network.
This switch communicates with the Z-Wave enabled
switch through the traveler wire, providing manual On/Off/
Dim control of the connected lighting (through the active
Z-Wave switch) and synchronization of the lighting status
(On/Off/Dim level) between the switches.
There are no user serviceable parts in this unit.