Cleaning of filters – GE 169072 User Manual

Page 8

background image


Cleaning of filters

Pre-motor filter
1. remove the flexible hose from the canister, open the front cover and take out

the dust bag holder.

2. take out the pre-motor filter.

3. Clean the filter by

rinsing with tap
water. thoroughly
dry and install it

note: make sure filter is completely dry before re-installation.

exhaust filter
1. Lift off the grill located on the back of

the vacuum

2. take out the HePA filter and clean with

round Brush (part e in Accessory Kit).
re-install it.

warning: please unplug the unit before
beginning any cleaning or maintenance

note: make sure that all filters and/or dust bag are in position before operation