Ag Leader PFadvantage Cotton Harvest Quick Reference Sheets - Manual

PFadvantage – QUICK REFERENCE SHEET – COTTON HARVEST – February 2003
Changing/Creating/Naming Fields
STEP ACTION
1 Press MENU key until FIELD is displayed. Press
FIELD key.
2 Press UP or DOWN ARROW key to scroll to a different
field. To create a new field, press UP ARROW key until
“CREATE NEW FIELD” is displayed.
3 To name field:
3a Press RIGHT ARROW key.
3b Press UP or DOWN ARROW to set character.
3c Repeat Steps 3a-3b, Name can be 8 characters long.
3d Press ACCEPT key to accept name.
4 To change cotton calibration set:
4a Press key to right of line displaying the calibration set.
4b Press UP or DOWN ARROW key to set the calibration
set.
4c Press ACCEPT key to accept the calibration set.
5 Press ACCEPT key to create or change field.
Changing /Creating/Naming Loads
STEP ACTION
1 Press MENU key until LOAD key is displayed. Press
LOAD key.
2 Press UP or DOWN ARROW key to scroll to a different
load. To create a new load, press UP ARROW key until
“CREATE NEW LOAD” is displayed.
3 To name load:
3a Press RIGHT ARROW key.
3b Press UP or DOWN ARROW to set character.
3c Repeat Steps 3a-3b, Name can be 8 characters long.
3d Press ACCEPT key to accept name.
4 Press ACCEPT key to create or change load.
Calibrating Stop Height
STEP ACTION
1 Press MENU key until CAL key is displayed. Press CAL key.
2 Press BOTTOM RIGHT ARROW key until STOP HGT key is
displayed. Press STOP HGT key.
3 Press UP or DOWN ARROW key to select cotton calibration
set.
4 Press ENTER HEIGHT key.
5 Position header at height to shut off acre counting.
6 Press SET HEIGHT key. Press ACCEPT key.
7 Press EXIT key twice.
Setting Full Swath
STEP ACTION
1 Press MENU key until SETUP key is displayed. Press SETUP
key.
2 Press VEHICLE key
3 Check to make sure the machine configuration is set to the
correct number of rows. Edit and press UP or DOWN
ARROW key if necessary. Press ACCEPT/EXIT key.
4 Press EXIT key.
5 Press BOTTOM RIGHT ARROW key until SWATH is
displayed.
6 Press SWATH key.
7. Select FULL SWATH and press the EDIT key.
8 Press UP or DOWN ARROW key to change number. Press
ACCEPT key.
9 If you have uneven row spacing, you can override row-to-row
spacings.
10 Press EXIT key once to return to main operating screen.