Ag Leader PF3000/PF3000Pro Harvest Master Mode Operators Manual - Manual

PF3000 and PF3000 Pro Using PF with HarvestMaster
Ag Leader Technology Installation and Cable Connections
September 2000 1
Hooking Up
PF3000 or PF3000
Pro NOTE: Insert these instructions in the Options Section of the PF3000 or
PF3000 Pro Operator's Manual.
Parts required for this procedure:
•
PF3000 Tall U-bracket (PN 2000105-1)
•
PF3000 Pro U-bracket (PN 3001124)
•
Battery Cable for PF3000 or PF3000 Pro
PN 2000497-1 (8 ft) or 2000497-2 (16ft)
•
HarvestMaster Serial Cable (comes with HarvestMaster yield monitor)
Step-by-Step
Procedure 1. Attach the monitor bracket to the monitor
2. Determine a mounting location for the monitor and mark the holes for the
bracket at the location you determined in Step 1. Remove the monitor from
the bracket.
3. Drill the holes for the mounting bracket and mount the bracket.
4. Attach the HarvestMaster serial cable to Port 3 of the monitor and run the
cable to the HarvestMaster unit and attach to the Host port. See Figure 1.
Figure 1. Cable attachment on HarvestMaster Unit
PF3000 or PF3000 Pro HM 500 or 570
Battery Cable
Host Port HarvestMaster
Serial Cable
GPS
Antenna