Ag Leader InSight Flow Meter - Manual

Part No. 2002831-32 Rev. B 1
Flow Meter Control Module
Quick Reference Sheet
Section 1: Configuration Procedure
The InSight’s flow meter feature allows you to create a record of product
applications. The following setup procedure describes how to configure flow meter
logging using the Application Rate module for a single product application. To begin this
procedure, go to the Configuration Tab in Application setup and press the Add button.
Flow Meter Configuration for a single product
STEPS ACTION
1 Select Single Product Configuration Type
To add a new flow meter configuration, press the Add button on the
Configuration Tab.
2 Select Vehicle
Select the Vehicle to be used in the configuration from the drop-down list, press
Next to continue and proceed to Step 6. Otherwise, if a new vehicle needs to be
made, press the New button.
3 Create New Vehicle
Select the Vehicle to be used in the configuration from the drop-down list.
4 Enter Vehicle Information
Use the on-screen keyboard to enter names for the Vehicle Make and Model.
Press Next to continue.
If you selected Tractor or Self-Propelled Spreader in Step 3, proceed
to Step 5 on page 2.
If you selected Self-Propelled Sprayer in Step 3, proceed to Step 8 on
page 2.
5 Enter Vehicle Name
If you selected Tractor or Self-Propelled Spreader in Step 4, the InSight display
combines the Vehicle Make and Model for use as a Vehicle Name. Use the on-
screen keyboard to edit the vehicle name, if desired. Press Finish to complete
Vehicle setup and continue with the configuration process.
If you selected Tractor in Step 3, press Finish and proceed to Step 6.
If you selected Self-Propelled Spreader in Step 3, press Finish and
proceed to Step 13.