Ag Leader PF3000/PF3000Pro Harvest Master Mode Operators Manual - Manual (Page 11)

PF3000 and PF3000 Pro Using PF with HarvestMaster
Ag Leader Technology Setup
September 2000 9
Setup – Step 7
Create Field and
Loads and set Crop
Type
Fields and Loads can be setup ahead of harvest or during harvest. Refer to the
steps below:
a) Press MENU key until FIELD key and LOAD key is displayed on bottom.
Press FIELD key (press twice if load displayed on top line) to display field on
entire screen.
b) If desired, name the field by pressing the Right Arrow key. Use the Up or
Down Arrow keys to set the character. Set another character by moving the
cursor using the Left or Right Arrow key. Press ACCEPT key once when
finished.
c) Press key to right of line displaying crop. Use Up or Down Arrow keys and
set the crop. Press ACCEPT key twice.
d) To create or change to a different field, press the FIELD key again. Use Up or
Down Arrow keys to select a different field. Name field and set crop. Press
ACCEPT key until at main screen. Field is now active.
e) To create or change to a different load, press the LOAD key. Change or
name the load as described for field in steps b & d. You can not set the crop
on a load.