Power over ethernet – American Fibertek SM10p-PoE User Manual
Page 107
Power over Ethernet
This segment shows the Power over Ethernet function.
PoE Status
¢
Maximum Power Available: Displays the maximum power supply in Watt.
¢
Actual Power Consumption: This column shows the real-time total power
consumption.
¢
Power Source: This column shows the power source which is supplying.
¢
Power Source 1 (AC): This column shows the supplying power value of power
source 1.
¢
Power Source 2 (AC+DC): This column shows the supplying power of power
source 2.
¢
Firmware Version: This column shows the PoE chip’s firmware version.
¢
AC Disconnect: Mark this check box to monitor the AC impedance on the port
terminals and removes power when the impedance rises above a certain value, for a
100