American Fibertek SM10p-PoE - Manual (Page 65)

‹ Link UP & Link Down: The system will result a log message when
port connection is up and down
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
you to synchronize switch clocks in the Internet.
1. SNTP Client: enable or disable SNTP function to get the time from the SNTP
server.
2. Daylight Saving Time: enable or disable daylight saving time function. When
daylight saving time is enabling, you need to configure the daylight saving time
period.
3. UTC Timezone: set the switch location time zone. The following table lists the
different location time zone for your reference.
Local Time Zone Conversion from UTC Time at 12:00 UTC
November Time Zone
Oscar Time Zone
ADT - Atlantic Daylight
AST - Atlantic Standard
EDT - Eastern Daylight
EST - Eastern Standard
CDT - Central Daylight
CST - Central Standard
MDT - Mountain Daylight
MST - Mountain
Standard
- 1 hour
-2 hours
-3 hours
-4 hours
-5 hours
-6 hours
-7 hours
58
11am
10 am
9 am
8 am
7 am
6 am
5 am