American Fibertek SM10p-PoE - Manual (Page 39)

forward-time [seconds] forward-time global
configuration
command to set the
forwarding-time for the
specified
spanning-tree
instances. The
forwarding time
determines how long
each of the listening
and
learning states last
before the port begins
forwarding.
forward-time 20
stp-path-cost I Use the spanning-tree switch(config)#interface
[1~200000000] cost interface
configuration
command to set the
path cost for Spanning
Tree
Protocol (STP)
calculations. In the
event of a loop,
spanning tree
considers the path
cost when selecting
an interface to place
into the forwarding
state.
fastEthernet 2
switch(config-if)#stp-path-cost 20
stp-path-priority I Use the spanning-tree switch(config)#interface
[Port Priority] port-priority interface
configuration
fastEthernet 2
switch(config-if)#stp-path-priority
command to configure 128
32