American Fibertek SM10p-PoE - Manual (Page 63)

SMTP Configuration interface
System Event Log - Event Configuration
Select the system log and SMTP events. When selected events occur, the system will
result the log information. Also, per port log and SMTP events can be selected.
¢ System event selection: 4 selections – Device cold start, Device warm start,
SNMP Authentication Failure, and X - ring topology change. Mark the checkbox to
select the event. When selected events occur, the system will produce the logs
‹ Device cold start: When the device executes cold start action, the system will
produce a log event
‹ Device warm start: When the device executes warm start, the system
will produce a log event
‹ Authentication Failure: When the SNMP authentication fails, the system will
56