American Fibertek SM10p-PoE - Manual (Page 55)

¢ System Location: Assign the switch physical location (The maximum length is 64
bytes)
¢ System Description: Displays the description of switch(Read only cannot be
modified)
¢ Firmware Version: Displays the switch’s firmware version
¢ Kernel Version: Displays the kernel software version
¢ MAC Address: Displays the unique hardware address assigned by manufacturer
(default)
¢ And than, click Apply
System Information interface
IP Configuration
User can configure the IP Settings and DHCP client function
¢ DHCP: Disable or enable the DHCP client function
¢ IP Address: Assign the switch IP address. The default IP is 192.168.1.77
¢ Subnet Mask: Assign the switch IP subnet mask
¢ Gateway: Assign the switch gateway. The default value is 192.168.1.254
¢ DNS1: The abbreviation of Domain Name Server—an Internet service that
translates domain name into IP addresses. D omain name are alphabetic which
48